聚碳酸酯,PC Radici Compounds RPC20G10HSL VO是东莞市双帮塑胶原料有限公司常年销售的塑料,因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告,COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法,塑料牌号太多,本网站没有提供的本公司也有代理,详情请咨询本公司相关业务人员0769-87795123,微信:13549213581 QQ:15397858 13549213581 肖生
聚碳酸酯PC, 玻璃纤维增强材料10%,超高韧性, 阻燃
Radici Compounds RPC20G10HSL VO
聚碳酸酯
Radici Plastics USA, Inc.
Technical Data
产品说明
RPC20G30HSL VO is a flame retarded polycarbonate compound, formulated using higher flow resin, and reinforced with 10% glass fiber. RPC20G30HSL VO is Recognized by Underwriters Laboratories, under file number E148796, meeting the V-O* requirements of UL 94 at 1.5mm in all colors. This formulation is suitable for processing by injection molding, offering easier flow for large area or complex shape parts, or multi-cavity long flow path tools.
Polycarbonate is an engineering thermoplastic widely recognized for outstanding toughness, excellent strength, rigidity and creep resistance, and dimensional stability. The addition of glass fiber improves rigidity, especially at high temperature, while additional benefits in dimensional stability and reduced mold shrinkage permit the production of complex shape parts to close dimensional tolerances.
RPC20G30HSL VO should be considered for applications where these processing and performance advantages are required, combined with flame retardance.
总体
材料状态 • 已商用:当前有效
资料 1 • Technical Datasheet (English)
搜索 UL 黄卡 • Radici Plastics USA, Inc.
供货地区 • 北美洲
填料/增强材料 • 玻璃纤维增强材料, 10% 填料按重量
性能特点 • 超高韧性 • 刚性,高 • 良好的抗蠕变性
• 尺寸稳定性良好 • 高强度 • 阻燃性能
物理性能 额定值单位制 测试方法
比重 1.45g/cm³ ASTM D792
收缩率 - 流动 (3.18 mm) 0.20 到 0.30% ASTM D955
吸水率 (23°C, 24 hr) 0.12% ASTM D570
机械性能 额定值单位制 测试方法
抗张强度 (断裂) 110MPa ASTM D638
伸长率 (断裂) 3.0 到 5.0% ASTM D638
弯曲模量 7580MPa ASTM D790
弯曲强度 162MPa ASTM D790
冲击性能 额定值单位制 测试方法
悬壁梁缺口冲击强度 (3.18 mm) 85J/m ASTM D256
热性能 额定值单位制 测试方法
热变形温度 (1.8 MPa, 未退火) 150°C ASTM D648
维卡软化温度 154°C ASTM D1525
可燃性 额定值单位制 测试方法
UL 阻燃等级 (1.50 mm, All) V-0 UL 94
注射 额定值单位制
干燥温度 121°C
干燥时间 4.0hr
建议的最大水分含量 0.020%
建议注入量 40 到 70%
螺筒后部温度 282°C
螺筒中部温度 288°C
螺筒前部温度 293°C
加工(熔体)温度 277 到 310°C
模具温度 71.1 到 93.3°C
背压 0.517 到 0.862MPa
螺杆转速 40 到 80rpm
垫层 3.18 到 6.35mm
聚碳酸酯,PC Radici Compounds RPC20G10HSL VO是东莞市双帮塑胶原料有限公司常年销售的塑料,因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告,COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法,塑料牌号太多,本网站没有提供的本公司也有代理,详情请咨询本公司相关业务人员0769-87795123 微信:13549213581 QQ:15397858
13549213581 肖生
|